MB-060571 Brake Master Wheel Cylinder Fits Mitsubishi Canter Fuso

Mô tả sản phẩm

Product Function Description

The brake master wheel cylinder is the foundation of your Mitsubishi vehicle's braking system. When you press the brake pedal, this master cylinder converts the mechanical force into hydraulic pressure, pushing brake fluid through the brake lines to activate the brake calipers or wheel cylinders at each wheel. This hydraulic pressure is what actually stops your vehicle. For Mitsubishi vehicles ranging from passenger cars to light trucks, a properly functioning brake master cylinder is essential for safe and predictable braking performance. It ensures consistent pedal feel, proper stopping distance, and reliable activation of the ABS system. A failing master cylinder compromises your vehicle's most critical safety system, putting you and your passengers at risk. This NOS (New Old Stock) unit represents genuine Mitsubishi quality with original factory specifications.

Product Specifications

When Should You Replace It?

Consider replacing your brake master cylinder if you experience any of the following symptoms: Spongy or soft brake pedal – the pedal feels mushy and travels too far before engaging. Brake pedal slowly sinks to the floor while holding pressure at a stop. Brake fluid leaks visible under the vehicle or around the master cylinder area. Brake warning light appears on the dashboard. Reduced braking power – the vehicle takes longer to stop than normal. Brake pedal feels hard and requires excessive force. Contaminated or dark-colored brake fluid in the reservoir. External leaks from the master cylinder or internal seal failure causing fluid bypass. ABS warning light illuminated along with brake issues. Low brake fluid level without visible external leaks (internal leakage). Corrosion visible on the master cylinder housing.

Why Choose This Brake Master Cylinder for Your Mitsubishi?

 Direct Fit Replacement – Designed specifically for Mitsubishi vehicles, this master cylinder bolts directly to your existing brake booster with no modifications required. Restores Factory Brake Feel – Over time, the internal seals of the original master cylinder wear and allow fluid bypass, resulting in a spongy pedal. This  cylinder restores the firm, confident brake pedal feel that Mitsubishi designed for your vehicle. Ensures Safe Stopping Power – A properly functioning master cylinder delivers consistent hydraulic pressure to all four wheels, ensuring predictable braking and shorter stopping distances when you need them most. Dual-Circuit Safety – This master cylinder features a dual-circuit design – if one circuit fails, the other remains operational, providing a backup safety margin. Preserves Vehicle Originality – For classic and vintage Mitsubishi vehicles, using  parts helps maintain originality and value.

Package Contents

1 x Brake Master Cylinder. Note: Brake fluid is NOT included. Gaskets or sealing washers may not be included – please reuse existing or purchase separately. Brake booster is NOT included. Please confirm reservoir configuration before purchasing.

Installation Tips

Important: The brake system is a critical safety system. Professional installation is strongly recommended. Before installation, ensure the vehicle is parked on level ground and securely supported. Remove the brake fluid from the reservoir. Disconnect the brake lines from the old master cylinder – be careful not to damage the line fittings. Remove the mounting nuts and remove the old cylinder. Critical Step: Bench-bleed the new master cylinder before installation to remove internal air – this step cannot be skipped. Mount the new cylinder to the brake booster and tighten the nuts to factory torque specifications. Reconnect all brake lines. Fill the reservoir with fresh Mitsubishi-approved brake fluid. Bleed the entire brake system starting from the wheel farthest from the master cylinder to remove all air from the lines. Check all connections for leaks after bleeding. Critical Step: After installation, test brake pedal feel – it should feel firm and consistent. A spongy pedal indicates air remains in the system and bleeding must be repeated. Professional bleeding equipment is recommended for best results.

After-Sales Service & Warranty

We stand behind the quality of our products. This Mitsubishi brake master cylinder comes with a 12-month warranty against manufacturing defects. If you have any questions or issues, please contact us and we will respond within 24 hours.

Recommended Related Products

Brake Booster / Brake Line Flaring Tool Kit / Brake Bleeder Tool / Brake Line Wrenches / Brake Calipers / Brake Shoes

Should you need any, we will be happy to recommend more suitable products for you.